Fuselage 
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Locating the floor board mounts
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Cutting the 3/4 box to make floor supports.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Cardboard template for wing mount
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Completed wing mount
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Using scrap steel to bend the landing gear support.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Locating the floor board mounts
Viewed: 824 times.
Cutting the 3/4 box to make floor supports.
Viewed: 837 times.
Cardboard template for wing mount
Viewed: 709 times.
Completed wing mount
Viewed: 674 times.
Using scrap steel to bend the landing gear support.
Viewed: 634 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
locating the support
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Difference between the plan and the actual part.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Locating the front landing gear support in line with the rear.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010685
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010686
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
locating the support
Viewed: 701 times.
Difference between the plan and the actual part.
Viewed: 630 times.
Locating the front landing gear support in line with the rear.
Viewed: 614 times.
P1010685
Viewed: 615 times.
P1010686
Viewed: 571 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010689(1)
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010690(1)
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010691(1)
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Riveting the nut plates.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Finished floor supports.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
P1010689(1)
Viewed: 590 times.
P1010690(1)
Viewed: 565 times.
P1010691(1)
Viewed: 618 times.
Riveting the nut plates.
Viewed: 577 times.
Finished floor supports.
Viewed: 567 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Left side front wing mount.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
This piece was missing from my water jet patterns so I had to cut it by hand.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010701(1)
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
First attempt at bending the seats with a borrowed bender. Tube was packed with sand and the ends welded closed. This was bent cold as there was no way to get heat into the bender.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Fixture to get the rudder pedals to be the same length.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Left side front wing mount.
Viewed: 567 times.
This piece was missing from my water jet patterns so I had to cut it by hand.
Viewed: 539 times.
P1010701(1)
Viewed: 553 times.
First attempt at bending the seats with a borrowed bender. Tube was packed with sand and the ends welded closed. This was bent cold as there was no way to get heat into the bender.
Viewed: 552 times.
Fixture to get the rudder pedals to be the same length.
Viewed: 566 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Rudder pedal pivots.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Actually my third attempt at bending the seats. This style bender worked acceptably. Tube was again packed with sand and I used heat, it sometimes took more than one try as it cooled quickly.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010707(1)
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010709(1)
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1010710(1)
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Rudder pedal pivots.
Viewed: 568 times.
Actually my third attempt at bending the seats. This style bender worked acceptably. Tube was again packed with sand and I used heat, it sometimes took more than one try as it cooled quickly.
Viewed: 559 times.
P1010707(1)
Viewed: 568 times.
P1010709(1)
Viewed: 599 times.
P1010710(1)
Viewed: 727 times.
Powered by Gallery v1.4.4-pl4 RSS