Fuselage 
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
When you mount the front make sure to allow for the angled floor. I don't want the pedal to contact the floor when depressed. It could wedge and lock the brakes.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Spacing the brake linkage
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
One side finished
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Welding the doubler for the other brake linkage
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Finished linkage
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
When you mount the front make sure to allow for the angled floor. I don't want the pedal to contact the floor when depressed. It could wedge and lock the brakes.
Viewed: 888 times.
Spacing the brake linkage
Viewed: 795 times.
One side finished
Viewed: 887 times.
Welding the doubler for the other brake linkage
Viewed: 759 times.
Finished linkage
Viewed: 782 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Finished linkage
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Master cylinders installed
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Complete assembly
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
I used the wood to get the distance between the landing gear mounts.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
With everything mounted in the fixture I spaced the mounting plates for the width of the spring legs.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Finished linkage
Viewed: 676 times.
Master cylinders installed
Viewed: 736 times.
Complete assembly
Viewed: 770 times.
I used the wood to get the distance between the landing gear mounts.
Viewed: 745 times.
With everything mounted in the fixture I spaced the mounting plates for the width of the spring legs.
Viewed: 682 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Everything welded
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
I tried to press the outer axle sleeve over the axle and it didn't work so I decided to slit it.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
It fit pretty good
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
I clamped the split sleeve over the axle.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
I tack welded it so I could remove the clamps.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Everything welded
Viewed: 744 times.
I tried to press the outer axle sleeve over the axle and it didn't work so I decided to slit it.
Viewed: 818 times.
It fit pretty good
Viewed: 776 times.
I clamped the split sleeve over the axle.
Viewed: 748 times.
I tack welded it so I could remove the clamps.
Viewed: 795 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
After removing the clamps I welded the sleeve.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
After polishing the weld it looked pretty good. It still needs rosette welds.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Starting the brake mounting rings.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Finishing up the rings
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Axles and brake rings.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
After removing the clamps I welded the sleeve.
Viewed: 761 times.
After polishing the weld it looked pretty good. It still needs rosette welds.
Viewed: 762 times.
Starting the brake mounting rings.
Viewed: 698 times.
Finishing up the rings
Viewed: 649 times.
Axles and brake rings.
Viewed: 705 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Making the rings for the spring supports.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Axel parts
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Making the spring supports on the Grizzly lathe.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Gear parts
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Simple but must have spring compressor.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Making the rings for the spring supports.
Viewed: 697 times.
Axel parts
Viewed: 755 times.
Making the spring supports on the Grizzly lathe.
Viewed: 680 times.
Gear parts
Viewed: 641 times.
Simple but must have spring compressor.
Viewed: 670 times.
Powered by Gallery v1.4.4-pl4 RSS