Engine Mount 
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Aluminum plate with 250mm spaced holes. I made inserts to replace the rubber mounts.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
I made a box frame to hold the plate at 90 degrees and at the proper location.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
I drilled a 1/4 hole in the exact center for the thrust line and mounted some threaded rod. I put this 7 inches below the upper longeron.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Mounts. The tube dimension is not shown on the plans. Make sure that they are long enough for the tube angle to clear. Mine are 1.5 bottom 2.0 top.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Trial fitting the mounts.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Aluminum plate with 250mm spaced holes. I made inserts to replace the rubber mounts.
Viewed: 841 times.
I made a box frame to hold the plate at 90 degrees and at the proper location.
Viewed: 871 times.
I drilled a 1/4 hole in the exact center for the thrust line and mounted some threaded rod. I put this 7 inches below the upper longeron.
Viewed: 860 times.
Mounts. The tube dimension is not shown on the plans. Make sure that they are long enough for the tube angle to clear. Mine are 1.5 bottom 2.0 top.
Viewed: 828 times.
Trial fitting the mounts.
Viewed: 788 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
I necked down the bolts so the welding wouldn't trap them.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
The necked down bolt installed. Even being necked down I had to cut and hammer them out.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Top right leg
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Top and bottom right legs.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Left bottom leg.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
I necked down the bolts so the welding wouldn't trap them.
Viewed: 785 times.
The necked down bolt installed. Even being necked down I had to cut and hammer them out.
Viewed: 846 times.
Top right leg
Viewed: 769 times.
Top and bottom right legs.
Viewed: 817 times.
Left bottom leg.
Viewed: 878 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Left top leg.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Trial fitting the right side. There are no dimensions for this so I am eyeballing it.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Getting ready to weld.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020335
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020336
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Left top leg.
Viewed: 796 times.
Trial fitting the right side. There are no dimensions for this so I am eyeballing it.
Viewed: 749 times.
Getting ready to weld.
Viewed: 830 times.
P1020335
Viewed: 802 times.
P1020336
Viewed: 772 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020337
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020338
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020339
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020340
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020341
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
P1020337
Viewed: 756 times.
P1020338
Viewed: 764 times.
P1020339
Viewed: 871 times.
P1020340
Viewed: 857 times.
P1020341
Viewed: 758 times.
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
Supporting the top X brace
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020343
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020344
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
The mount is almost completed but I jumped ahead and started forming the sides.
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
FRAME
FRAME
FRAME
P1020359
FRAME
FRAME
FRAME
FRAME
FRAME FRAME FRAME
FRAME
Supporting the top X brace
Viewed: 763 times.
P1020343
Viewed: 840 times.
P1020344
Viewed: 772 times.
The mount is almost completed but I jumped ahead and started forming the sides.
Viewed: 828 times.
P1020359
Viewed: 558 times.
Powered by Gallery v1.4.4-pl4 RSS